Dicas Reparação
Modelo - Chassis
Pesquisa:
Resultados 83903
Resultados 83903
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | M101 | SHORT ON MIC. | No sound. | ||
| Sony | ICFS5W | SOLDER CONNECTION | Sound would come on loud then become low and distorted. | ||
| Sony | ICFC805W | DEFECTIVE IC AND R602 | No light in display tube. Low B+ to IC. | ||
| Sony | ICFC805W | BRIDGE SOLDER CONNECTIONS ON PCB | Clock running 10 seconds fast per minute. | ||
| Sony | ICFC511W | DEFECTIVE CLOCK | The time the alarm is set for moves with the rest of theclock. It will not stay at the time set. | ||
| Sony | ICFC411W | INCORRECT PART NUMBER - REVERSED | Incorrect part number - reversed. | ||
| Sony | ICFC410W | DEFECTIVE D4 | Continuous hum as if bad filter capacitor caused by shorteddiode, D4 replaced D4. | ||
| Sony | ICFC33W | DISPLAY TOO BRIGHT | Customer complains that display is too bright and wants toknow if his unit can be modified to correct his complaint. -HQ COMMENTS: Safety regulations do not permit changing the value of thecomponent that controls lamp brightness. | ||
| Sony | ICFC15W | DEFECTIVE POWER TRANSFORMER | Dead. Check for hum in radio when repaired. | ||
| Sony | ICFC15W | DEFECTIVE IC - MM5387N | Hour numbers jumped from 4 to 7, 8 back to 7 instead of 4, 5,6, 7. | ||
| Sony | ICFC15W | SHORT IN PCB | No clock read out. Voltage on grid too low. | ||
| Sony | ICFC11W | POOR CONTACT | No alarm, switch was not making proper contact. | ||
| Sony | ICFC11W | POOR CONNECTION IN SWITCH | Cannot set alarm. | ||
| Sony | ICF9650W | CRACK IN PCB | No sound, dial lamp lights, found no B+ to radio. | ||
| Sony | ICF9650W | BREAKS IN PCB | Circuit board broken at 3 out of 4 places where circuit boardis mounted on front panel. No damage visable on main cabinet assy.,packing or box. |