| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| JVC | 25S1EK MXII | StBy LED changes red to gren but no line drive | Check Q902 V if missing R903 ( 2K2 ) o/c | ||
| JVC | 25S1EK MXII | NO VISION - WONT TUNE IN | C119 47n IF UNIT. ON PIN 2 IC 101 | ||
| JVC | 25S1 | No sync in off air & AV mode | No sync pulses at IC201; IC103 -(Mc4066BF. SMD) on Text Board | ||
| JVC | 14ET1EK | Hotel mode? No chan store & "H" in top corner | Pull up res R605 27k for chip select pin was o/c | ||
| JVC | 14E1EK Onwa | Dead | Chopper Tr 2SD1545 leaky | ||
| JVC | 1480EK | Stuck in st/by (timer light?) | 22µ sm cap in stn select module had leaked & broken track between pin 2 of the IC and L001 choke. | ||
| JVC | 1430R | Hum bar | Smoothing cap 100µ 400v | ||
| JVC | 7860 | Bright raster. | C104 ( 10uf , 200v ) dries up , TR204 ( BC327 will do ) | ||
| JVC | 1480 | tuner drift | check sm comps | ||
| JVC | 1480 | proc module faulty | caused by 3 legged ceramic filter | ||
| JVC | 1480 | Dead - When main micro sus | check blue ceramic 3 legged filter | ||
| Jvc | HR- J240 | Não liga | C971 = 2200uf 16volt | Sub C 971 = 2200 uf 16volt | |
| JVC | HR-S 9500E | Cassete fica presa ao sair | Alavanca da embraiagem solta |