Service Mode (Modo de Serviço)

CHINA

TV

Service Mode

Press RECALL , press Volume down on the panel while hold press RECALL Chassis 502 LC863532 - 54D5, 54H7, 5Z00, 50S8, 50S9, 52Y7 Two metod to enter factory mode # Plug in the supplied remote hole # Atur volume 0, press MENU 6 5 6 8.

CHINA

TV

Service Mode

2 ways for service mode. (1) Press the hidden button located above. If the hidden button is missing, by opening the control panel, find the contact that led to the closing of two SERVICE menu. Standard matrix, 8x4, usually entered BUS press P + P-STBY and 9.5, Sleep (2) Clicking the MENU button three times to enter the Settings page. Press P + or P- select SWITCHING line. Dial the code "2483." TV enters the PAGE MENU. Turn the page menu button press MUTE PAGE, Disable Vertical - TV / AV. To enter the service menu of 3 or higher, you must set the OPTION PAGE 1.

CHINA

3Y11 3Y01 4Y01

TV

Service Mode

Press MENU 2 times - RECALL, QView, MUTE UСom ST6-ELAME2 Click the button: SKIP, Volume down - FINE TUNE

CHINA

TV

Service Mode

Press the holes that are already available in the remote Press the MENU 8 6 3 3. China TV LC86332B - 52Z6, 53L1 Press the holes that are already available in the remote Press the MENU 8 6 3 3 or 6 4 8 3.

CHINA

TV

Service Mode

Press the "MENU" Button button and press the code 8,5,0,0. of M symbol will show In the upper left corner. Select the desired menu press 0 to 9 following your own chose. TDA9381C38ND; OM8370-B-16NB

CHINA

TV

Service Mode

Press sequence CLOCK, pm, TIMER (DISP); Press 0 - 9 to select MENU; To enter the factory mode press SUB PAGE button on the remote control, while you press the volume down (Vol+)

CHINA

TV

Service Mode

Press QV hold about 4 seconds and then press the button on the remote control Menu1. Press the TEST button on the RC unit for factory use. The "TEST" is displayed on the screen. Digital Press, (Mkey) and corresponding on-screen display will appear. Some time PASSWORD will appear on-screen display, you need to enter 828.

CHINA

TV

Service Mode

Press CALL, PRESS MUTE and 980 codes. In the upper left corner there is a symbol of M. Chassis HAIER

CHINA

TV

Service Mode

Press Menu - display a picture menu and enter the code 6,4,8,3 - M symbol displayed on the screen. To exit the factory mode and return to normal press Power button on the remote control. In factory mode {"M" mode) there are 10 menu entirely. Menu 1 and Menu 4 can be selected directly, but the menu 5 and Menu 0 must choose the steps: Press CALL, to call the "M", press LOCK, then press any of the numeric keys 5 to 0. For example, to select Menu 7, you must press the LOCK CALL and turns and then press 7.

SANYO

LCD

Service Mode

Press INPUT 2,5,8,0; Factory menu Ch:UP/Down