Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Grexnolds | LR 1000 | FM estéreo s/ funcionar | CI1 (CA1310) | ||
Philips | CH1000 | DESLIGA LOGO APOS LIGAR. | DIODO EM CURTO D709. * JUL 95 MAN *. | ||
Philips | 4LC1000 | SEM SINCRONISMO VERTICAL (VERT5). | Verificar painel LCD. * 09Out96 ESC *. | ||
Philips | 4LC1000 | DESLIGA SOZINHO. | Lâmpada intermitente. * 20Dez95 ESC *. | ||
Philips | 4CL1000 | SEM NITIDEZ (QUALIDADE). | LAMPADA FLUORESCENTE DEFICIENTE (LP11). * JUL 95 MAN *. | ||
Philips | 3CL1000 | TELA ESCURA "PRETA" (VEJA TAMBEM BRIL4). | Ver lampada. * 09Out96 ESC *. | ||
Grexnolds | Receiver LR 1000 | FM estéreo s/ funcionar | CI1 (CA1310) | ||
Sony | TAM1000 | KEEPS CUTTING OFF ICM - REMOVE SOLDER SHORT ON IC306 | Cuts off first call and then it will not record any messageat all. | ||
Sony | PIC1000 | AC ADAPTER INDICATOR WITH BATTERIES | Unit indicated AC adapter when using batteries. Found 2.8VDC on IC802 Pin 3. | ||
Sony | SPP1000 | MYSTERIOUS FAILURE, AC ADAPTER DEAD, NO OPERATION | Unknown case of multiple component failure. Samplesforwarded, AC adapter blown. -HQ COMMENTS: I examined the sample and noticed that D404 was eitherremoved or missing. Without this diode there is about 100 volts ofcounteremf generated by the line rel | ||
Sony | SLVR1000 | AUTO TRACKING LIGHT FLASHING FOR A LONG TIME REPLACE C106 | All functions appeared to be normal, except auto tracking. Light flashes for a long time before stopping temporarily, only to start flashing again. | ||
Sony | SPP1000 | INTERMITTENT DIAL TONE | Intermittent dial tone, tapping board reveals problem. | ||
Sony | SPP1000 | ONLY POWER LED AFTER FEW MINS OF OPERATION - CHANGE C333 | Base stops working after a few min. of operation.3 v line drops to 1.2v and regulator and cap get warm. Cap C333 leaky.Part # and schematic list a 10mf cap. Actual value is 4.7mf. Pleaseadvise. -HQ COMMENTS: Please refer to the new version od s/m | ||
Sony | SPP1000 | NO DIGITAL CODE PGM/NO RING/NO TALK - REPLACE IC605 | Unit had no digital code PGM, no ring and no talk. Reset IC605inverter output was at 1.6v with VDD at 4.8v. IC605 was defective. | ||
Sony | LBTG1000 | INTERMITTENT OPEN - FLEX CABLE RUBBING ON CHASSIS | CD tray open only when door pressed in manually. |