Dicas Reparação
Modelo - Chassis 1000
Pesquisa: 1000 Enviar Dica Resolvida
Resultados 340
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Grundig | 1000 series | No power up | TR540 BC847 in micro reset circuitry. | ||
| Finlux | 1000/3000 | Dead | BY299 17v rect or Du16 138v HT rect | ||
| Finlux | 1000 srs EARLY | INT COLOUR , SEEMS LIKE DRY JOINTS | Ct12 REF OSC TRIMMER NOISY . LINK PINS 25 , 26 AND 1 , 5 TO SETUP | ||
| Finlux | 1000 early | No pic - crt htrs alight | Cb 2µ2 35v o/c (near col dec chip) | ||
| Finlux | 1000 -early | Int col with TDA3652A chip | ref osc trimmer Ct12 6-30pf noisy. To set up link pins 24/25 & 1/5 of ic & adj Ct12 for stationary col | ||
| Finlux | 1000 | This set would start off all right. But after abou | Ch11 ( 47uF , 63V ) | ||
| Finlux | 1000 | Standby - going into standby intermittently. | DA1 ( IN4007 ) in vision IF. | ||
| Finlux | 1000 | Raster - white. | DA1 ( IN4007 ) on vision IF. | ||
| Finlux | 1000 | No sound or picture - EHT ok. | Ri20 ( 100R ) o/c. | ||
| Finlux | 1000 | NO SOUND OR PICTURE | NO LINE DRIVE Ta2 BC547 OC | ||
| Finlux | 1000 | No sound or pic - line drive missing | Ta2 BC547 | ||
| Finlux | 1000 | No sound & sw to st/by aft 10 mins (no sync) | Check pin 13 ICh1 TDA2578A TB chip should be high - was only 0.5v (transmit ident) - chip faulty | ||
| Finlux | 1000 | No picture or sound - EHT ok. | Ri20 ( 100R ) o/c. | ||
| Finlux | 1000 | Int various inc red/green/off/false line lock/line tearing | 12v supply low due to Ta8 BD241 - also check Da1 | ||
| Finlux | 1000 | int st/by | lopt has hole in it |