Dicas Reparação HITACHI
Modelo - Chassis
Pesquisa: HITACHI Enviar Dica Resolvida
Resultados 1003
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Hitachi | C1646 | Dead - tries to start. | R908 22K high or o/c . making HT rise so set shutting down instantly , chk HT with line o/c & bulb | ||
| Hitachi | C15P108 Salora L | TEXT OK BUT NO PICTURE | PFO1 220R PRESET O/C FEEDS PIN 34 TDA3301 | ||
| Hitachi | C15P108 Salora L | SLOW START UP | CN10 1000uF 35v | ||
| Hitachi | C14P218 | St/by only | R902 82k o/c, R903 82k o/c | ||
| Hitachi | C1474R | No sound | IC201 TDA4503 - pin 13 should be 3.2v but read 0v | ||
| Hitachi | C1474R | Dead | ZD910 S.C. BZX79C2V7 | ||
| Hitachi | C1422R | PSU off with a bang | D801 bridge rect DB107G s/c, chopper Q801 IRFI630G s/c, D805 BZT03C130 130volt 1.3watt zener s/c, R814 0R39 1/2w o/c. R813 0R22 1/2w o/c, Q404 BUT11AX LOPTr s/c, or fit T9813136. CHS code -12022TM (expensive) | ||
| Hitachi | C1420VT | St/by only | Prot tr Tr7550 faulty | ||
| Hitachi | C1420VT | No pic/sound | No tuning volts - 33v stab ic faulty | ||
| Hitachi | C1420VT | Crack from LOPTx & st/by only | replace loptx | ||
| Hitachi | C1415T | No pic/sound ok | No line drive as Q701 BF459 dr tr o/c | ||
| Hitachi | C1414T | Stuck in st/by - no line drive | Safety thyristor Q703 TS0820-20 faulty - check by removing - set should then work | ||
| Hitachi | C1414T | off no st/by led | 82k 0.5w start up res R901 o/c | ||
| Hitachi | C1414T | Dead with ZD952 prot zener s/c | HT too high - R951 39k 1/2w o/c | ||
| Hitachi | C1414R-311 | dead | Q903 ON4584 chopper s/c R951 39k hi res |